Suction Strainers

 

Suction Strainers

MANY CAPABILITIES, ONE SOLUTION

Suction Strainers

What is a Strainer? 

During drafting operations, a strainer helps you pull water without bringing larger debris into your pump and equipment. A well-designed strainer will be optimized to minimize clogging and allow high flow. 

Low-Level Strainer w/ Jet Siphon

Low-level strainers allow you to collect water from tanks as well as natural water sources even when water levels are low.  

  • Float is included for use in deeper water and is removeable by a pull pin if it is not needed. Compact to maximize storage space.
  • Clog resistant stainless-steel screen allows high flow. 
  • Friction loss of just 0.5 PSI at 1500 GPM reduces strain on your pump, reduces potential for air vortexes to form, and maximizes drafting capacity.
  • Jet siphon to use for tank transfer or quick priming. Freely pivots to avoid kinks.
  • Built-in handle to easily carry.
  • Oversized sealed ball pivot with 45-degree range allows strainer to move with hose.

Jumbo Barrel Strainer

Jumbo barrel strainers give you adequate flow capability in a durable piece of equipment.  

  • Made with impact resistant polymer to minimize dents if dropped. 
  • Polymer resists corrosion, even with contaminated water sources. 
  • Oversized loop for easy tie-off. 
  • Hard anodized aluminum coupling that rotates easily on a polymer bearing ring.
  • 48 square inches of flow area for maximum flow capability.