100 Products Found

A1037-KIT CRANKSHAFT EXTENSION KIT 5" LONG   B-TO-ER ULTIMATIC ELECTRIC REMOTE TIP 1.5" NH (38mm) same as above except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   B-TO-ERP ULTIMATIC ELECTRIC REMOTE TIP 1.5" NH (38mm) Automatic pressure control with a flow capacity of 10-125 gpm (40-500 l/min). The nozzle operates at a standard 100 psi (7 bar). Includes flush without shutting down, molded rubber teeth for full-fill "power fog" pattern. Accepts both FJ-U FOAMJET low-expansion and FJ-UMX FOAMJET multi-expansion foam attachments. 1.5" NH (38mm) swivel coupling is standard. For use on TFT Tornado RC monitor only.   B-TO-ERP-120 ULTIMATIC ER W/PLUG 1.5"NH   B-TO-ERP-150 ULTIMATIC ER W/PLUG 1.5"NH   B-TOS-ER SELECTABLE ELECTRIC REMOTE TIP 1.5" NH (38mm) same as above except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   B-TOS-ERP SELECTABLE ELECTRIC REMOTE TIP 1.5" NH (38mm) Selectable gallonage nozzle is infinitely adjustable between 15 and 120 gpm @ 100 psi (50-450 l/min at 7 bar). Indexed flow settings are provided at 15 gpm and 50 l/min increments. Flow setting may be adjusted without shutting down or locked to a specific setting as desired. Includes flush without shutting down and molded rubber teeth for full-fill "power fog" pattern. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Accepts both FJ-U FOAMJET low-expansion and FJ-UMX FOAMJET multi-expansion foam attachments. 1.5" NH (38mm) swivel coupling is standard. For use on TFT Tornado RC monitor only.   BL-TO-ERP ULTIMATIC ELECTRIC REMOTE TIP 1.5" NH (38mm) same as above except 10-100 gpm @ 75psi. (40-380 l/min @ 5 bar)   HM-TO-ER 100 PSI (7 bar) MID-MATIC ELECTRIC REMOTE TIP 1.5" NH (38mm) same as above except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   HM-TO-ERP 100 PSI (7 bar) MID-MATIC ELECTRIC REMOTE TIP 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). The nozzle operates at a standard 100 psi (7 bar). Includes flush without shutting down, molded rubber teeth for full-fill "power fog" pattern. 1.5" NH (38mm) rigid rocker lug coupling is standard. For use on TFT Tornado RC monitor only.   HM-TOS-ER MID-MATIC ELECTRIC TIP 1.5NH   HM-TOS-ERP MID-MATIC ER W/PLUG 1.5NH - SPINNING TEE   HMD-TO-ER 100 PSI (7 bar) MID-FORCE ELECTRIC REMOTE TIP 1.5" NH (38mm) same as above except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   HMD-TO-ERP 100 PSI (7 bar) MID-FORCE ELECTRIC REMOTE TIP 1.5" NH (38mm) Automatic dual-pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Nozzle may be switched from 100 psi (7bar) and low pressure. Includes flush without shutting down, molded rubber teeth for full-fill "power fog" pattern. 1.5" NH (38mm) rigid rocker lug coupling is standard. For use on TFT Tornado RC monitor only.   HMD-TOS-ER MID-FORCE ELECTRIC TIP 1.5NH   HMD-TOS-ERP MID-FORCE ER W/PLUG 1.5NH - SPINNING TEE   M-ER1000-NJ MASTER STREAM 1000 ER 12-24VDC 2.5"NH Same as M-ERP1000-NJ except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ER1000-NL MASTER STREAM 1000 ER 12-24VDC 3.0"   M-ER1000-NN MASTER STREAM 1000 ER 12-24VDC 3.5"   M-ER1250-NJ MASTERSTREAM 1250 ER 12-24VDC 2.5"NH   M-ER1250-NL MASTERSTREAM 1250 ER 12-24VDC 3.0"   M-ER1250-NN MASTER STREAM 1250 ELECTRIC REMOTE Same as M-ERP1250-NN except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   M-ER1250-NP MASTERSTREAM 1250 ER 12-24VDC 4.0"   M-ER1250S-NJ MASTERSTREAM 1250 ER 12-24VDC 2.5" Same as M-ERP1250S-NJ except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ER1250S-NL MASTER STREAM 1250 ER 12-24VDC 3.0"   M-ER1250S-NN MASTER STREAM 1250 ER 12-24VDC 3.5"   M-ER1500-BP MASTERSTREAM 1500 ER 12-24VDC 4.0"BSP   M-ER1500-NJ MASTER STREAM 1500 ELECTRIC REMOTE   M-ER1500-NL MASTER STREAM 1500 ELECTRIC REMOTE   M-ER1500-NN MASTER STREAM 1500 ELECTRIC REMOTE Same as M-ERP1500-NN except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ER1500-NP MASTER STREAM 1500 ELECTRIC REMOTE   M-ER2000-BP MASTER STREAM 2000 ELECTRIC 4.0"BSP   M-ER2000-NJ MASTER STREAM 2000 ELECTRIC REMOTE Same as M-ERP2000-NN except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ER2000-NL MASTER STREAM 2000 ELECTRIC REMOTE Same as M-ERP2000-NN except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ER2000-NN MASTER STREAM 2000 ELECTRIC REMOTE Same as M-ERP2000-NN except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ER2000-NP MASTER STREAM 2000 ELECTRIC REMOTE Same as M-ERP2000-NN except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ERF1000-BJ MASTER STREAM 1000 ER 12-24VDC 2.5"BSP   M-ERF1000-NJ MASTER STREAM 1000 ER 12-24VDC 2.5"NH   M-ERP1000-BJ MASTER STREAM 1000 ER W/PLUG 2.5"BSP   M-ERP1000-NJ MASTER ELECTRIC REMOTE AUTOMATIC 2.5" NH (65mm) The M-ERP1000 has a flow capacity on 150-1000 gpm (600-3800 l/min). 2.5" (65mm) NH rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   M-ERP1000-NL MASTER ELECTRIC REMOTE AUTOMATIC 2.5" NH (65mm) The M-ERP1000 has a flow capacity on 150-1000 gpm (600-3800 l/min). 2.5" (65mm) NH rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   M-ERP1000-NN MASTER ELECTRIC REMOTE AUTOMATIC 2.5" NH (65mm) The M-ERP1000 has a flow capacity on 150-1000 gpm (600-3800 l/min). 2.5" (65mm) NH rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   M-ERP1250-NJ MASTER STREAM 1250 ELECTRIC REMOTE The M-ERP1250-NN has a flow capacity of 300-1250 gpm (1100 - 4500 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1250-NL MASTER STREAM 1250 ELECTRIC REMOTE The M-ERP1250-NN has a flow capacity of 300-1250 gpm (1100 - 4500 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1250-NN MASTER STREAM 1250 ELECTRIC REMOTE The M-ERP1250-NN has a flow capacity of 300-1250 gpm (1100 - 4500 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1250-NP MASTER STREAM 1250 ELECTRIC REMOTE The M-ERP1250-NN has a flow capacity of 300-1250 gpm (1100 - 4500 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1250SBJ MASTER ELECTRIC REMOTE AUTOMATIC   M-ERP1250SNJ MASTER ELECTRIC REMOTE AUTOMATIC 2.5" NH The M-ERP1250S has a flow capacity on 150-1250 gpm (600-4500 l/min). 2.5" (65mm) NH rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   M-ERP1250SNL MASTER ELECTRIC REMOTE AUTOMATIC 2.5" NH The M-ERP1250S has a flow capacity on 150-1250 gpm (600-4500 l/min). 2.5" (65mm) NH rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   M-ERP1250SNN MASTER ELECTRIC REMOTE AUTOMATIC 2.5" NH The M-ERP1250S has a flow capacity on 150-1250 gpm (600-4500 l/min). 2.5" (65mm) NH rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   M-ERP1500-BP MASTERSTREAM 1500 ER W/PLUG 4.0"BSP   M-ERP1500-NJ MASTER STREAM 1500 ELECTRIC REMOTE The M-ERP1500-NN has a flow capacity of 300-1500 gpm (1100-6000 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1500-NL MASTER STREAM 1500 ELECTRIC REMOTE The M-ERP1500-NN has a flow capacity of 300-1500 gpm (1100-6000 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1500-NN MASTER STREAM 1500 ELECTRIC REMOTE The M-ERP1500-NN has a flow capacity of 300-1500 gpm (1100-6000 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP1500-NP MASTER STREAM 1500 ELECTRIC REMOTE The M-ERP1500-NN has a flow capacity of 300-1500 gpm (1100-6000 l/min). With a twist of the large knob on the front of the nozzle, operating pressure can be immediately adjusted to tactile detent settings between 70 and 120 psi (4.8 and 8.3 bar). Specify coupling size (2.5", 3.0", 3.5", 4.0") (64mm, 75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP2000-NL MASTER STREAM 2000 ELECTRIC REMOTE The M-ERP2000-NN has a flow capacity of 300-2000 gpm (1100-8000 l/min). With a twist of the knob on the front of the nozzle, operating pressure can be immediately adjusted between 80 and 120 psi (6 and 8.3 bar). Specify coupling size (3.0", 3.5", 4.0") (75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP2000-NN MASTER STREAM 2000 ELECTRIC REMOTE The M-ERP2000-NN has a flow capacity of 300-2000 gpm (1100-8000 l/min). With a twist of the knob on the front of the nozzle, operating pressure can be immediately adjusted between 80 and 120 psi (6 and 8.3 bar). Specify coupling size (3.0", 3.5", 4.0") (75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERP2000-NP MASTER STREAM 2000 ELECTRIC REMOTE The M-ERP2000-NN has a flow capacity of 300-2000 gpm (1100-8000 l/min). With a twist of the knob on the front of the nozzle, operating pressure can be immediately adjusted between 80 and 120 psi (6 and 8.3 bar). Specify coupling size (3.0", 3.5", 4.0") (75mm, 90mm, 100mm) and threads. 3.5"NH (90mm) rocker lug swivel coupling is standard. For use on TFT RC monitors only.   M-ERS1000-NJ MASTER STREAM 1000 ER 12-24 VDC 2.5" Same as M-ERSP1000-NJ except with 6 ft of non-terminated remote wire for custom installations. Does not have SMARTSTREAM technology.   M-ERS1000-NN MASTER STREAM 1000 ER 12-24 VDC 3.5"   M-H1000-NJ MASTER STREAM 1000 HYDRO AUTO 2.5"NH   M-H1000-NL MASTER STREAM 1000 HYDRO AUTO 3.0"   M-H1000-NN MASTER STREAM 1000 HYDRO AUTO 3.5"   M-HF1000-NN MASTER STREAM 1000 HYDRO FIXED 3.5"   M-HS1000-NJ MASTER STREAM 1000 HYDRAULIC SELECTABLE   MD-ER-12A MAX-FORCE ELECTRIC TIP 2.5" same as MD-ERP-12A except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   MD-ER-14A MAX-FLOW ELECTRIC TIP 2.5" same as MD-ERP-14A except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   MD-ER-18A MAX-MATIC ELECTRIC TIP 2.5" same as MD-ERP-18A except with 6 ft of non-terminated remote wire for custom installations. Does not have SMART STREAM technology.   MD-ERP-12A 100 PSI (7bar) MAX-FORCE ELECTRIC REMOTE TIP Automatic dual-pressure control with a flow capacity of 100-500 gpm (400-2000 l/min). The nozzle may be switched between standard 100 psi (7bar) and 55 psi (4bar) by twisting a knob on the front of the nozzle. 2.5" NH (65mm) rigid rocker lug coupling is standard. For use on TFT RC monitors only.   MD-ERP-14A 100 PSI (7bar) MAX-FLOW ELECTRIC REMOTE TIP The nozzle will operate with pressures as low as 30 psi (2bar). 2.5" NH (65mm) rigid rocker lug coupling is standard. For use on TFT RC monitors only.   MD-ERP-15A MAX-FLOW ER W/PLUG 2.5"   MD-ERP-18A 100 PSI (7bar) MAX-MATIC ELECTRIC REMOTE TIP Automatic pressure control with a flow capacity of 100-500 gpm (400-2000 l/min). The nozzle operates at a standard 100 psi (7bar). 2.5" NH (65mm) rigid rocker lug coupling is standard. For use on TFT RC monitors only.   MD-ERP18ARU MAX-MATIC ER W/PLUG 2.5" RUSSIAN   ME1-TO-ER METRO 1 ELECTRIC TIP 1.5"   ME1-TO-ERP METRO 1 ER W/PLUG 1.5"   ME1-TOS-ER METRO 1 ER NO PLUG 1.5NH- SPINNING TEETH   ME1-TOS-ERP METRO 1 ER W/PLUG 1.5NH - SPINNING TEETH   MERFP1000-NJ MASTER ELECTRIC REMOTE FIXED FLOW 2.5" NH (65mm) This nozzle, built on the Master Stream body, is a fixed constant flow nozzle. It is factory preset at the customer's specified Kfactor 50 to 105 (1000 gpm (4000 l/min) max ). 2.5" NH (65mm) rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. Flow and pressure are laser engraved on the baffle. For use on TFT RC monitors only.   MERFP1000-NN MASTER STREAM 1000 ER W/PLUG 3.5"   MERSP1000-NJ MASTER STREAM 1000 ER W/PLUG 2.5"   MERSP1000-NN MASTER ELECTRIC REMOTE SELECTABLE Flows of 250, 350, 500, 750, and 1000 gpm at 100 psi (950, 1300, 2000, 3000 and 4000 l/min @ 7 bar). Flow is adjusted by depressing the outer baffle and rotating to the laser engraved position for the desired flow. Nozzle must be shut down to change settings. 2.5" NH (65mm) rocker lug swivel coupling is standard. 3.0" NH (75mm) or 3.5" NH (90mm) coupling is optional. For use on TFT RC monitors only.   MERSPM1000NJ   MP-ER1000-BJ   MP-ER1000-NN   MP-ER1250-BJ MASTERMATIC 5000 ER 12-24VDC 2.5"BSP   MP-ER1250-BP MASTERMATIC 5000 ER 12-24VDC 4.0"BSP   MP-ER1500-BJ MASTERMATIC 6000 ER 12-24VDC 2.5"BSP   MP-ER1500-BP MASTERMATIC 6000 ER 12-24VDC 4.0"BSP   MP-H1000-BJ   MP-I1000-BJ   MP-R1000-BJ   MPERP1000-BJ   MPERP1000-BP   MPERP1000-NN   MPERP1250-BP MASTERMATIC 5000 ER W/PLUG 4.0"BSP   MPERP1500-BJ MASTERMATIC 6000 ER W/PLUG 2.5"BSP   MPERP1500-BP MASTERMATIC 6000 ER W/PLUG 4.0"BSP   MPERP2000-BP MASTERMATIC 8000 ER W/PLUG 4.0"BSP   MT-HR-6ASA MASTER STREAM 4000 HYDRAULIC 6"ANSI 150   MT-HR-6SX MASTER STREAM 4000 HYDRAULIC 6"STORZ