New User?   Products  
Product Details
Y4E-CT-10
TETHERED MONITOR OPERATOR STATION


Part No:Y4E-CT-10


 Details
TETHERED MONITOR OPERATOR STATION
This operator station allows the electric monitor to be controlled from a handheld pendant. This operator station is supplied with a stainless steel mounting bracket to securely store the unit. The enclosure has an o-ring seal, liquid tight strain relief fitting with o-rings, and a membrane switch to keep water out. Any commands from this operator station will override commands made on the monitor control box. The pendant receptacle can be connected to the Panel Mount Operator Station or directly to the monitor through a customer supplied terminal block. A cable is supplied pre-connected to the panel-mounted receptacle and includes waterproof cap and chain. The Tethered Control Station is supplied with a 10' long pre-connected cable. This pendant plugs into a panel-mounted receptacle. This operator station is equipped with "last button pressed" software or can be configured as a "master" station. Mounting bracket meets NFPA 1901 9G force requirements which ensures the security of equipment and safety of personnel.

Weight: 5.400 lbs (0.000 kg)

Operation Energy Source Electric (12/24 vdc)


     Related Videos   
    Monsoon Monitor

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Electrical Monitor Motor Board Troubleshooting

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE




 
•   TFT RC monitor accessories and components are for use with Tornado RC, Hurricane RC, Typhoon RC and Monsoon RC and allow control of the monitors from remote locations.

•   The Panel Mount, Tethered and Wireless Operator Stations have a waterproof membrane switch to control vertical, horizontal, and nozzle patterns as well as the programmable PARK and Oscillate functions. Power, PARK and Oscillate indicator lights are standard. Two Auxiliary buttons are included and require the Remote Auxiliary Function Relay, Extend-A-Gun RC interface, or valve interface box to control lights, Extend-A-Gun RC, valve actuators, or other equipment.

•   All operator stations are equipped with "last button pressed" software so any button presses from the operator station will take over control from any other operator station. These operator stations can also be configured, by an internal DIP switch, as a "Master" control station so that commands from the operator station cannot be overridden.



Task Force Tips ® is a registered trademark of Task Force Tips, Inc.
TFT ® is a registered trademark of Task Force Tips, Inc.